Getting the Best Table Saw for Your Needs

There are a few things you need to consider when buying the right table saw for your woodworking shop. But first, you have to choose one from the contractors saw, cabinet saw and the hybrid table saws.

The table saw, such as https://www.thesharpcut.com/dewalt-dwe7480/ is at the heart of any woodwork shop, and you will use it several times more than any other machine in the shop because the right wood size makes the difference between delivering the task needed by the client from not doing so. However, you need to go slowly so that you get the best table saw for the task.

Here are a few aspects to check out.

The Motor Horsepower

The horsepower and the blade size are closely related. The bigger the blade, the more power you need to rotate it at speed required to cut the wood. Too little power can make the saw to slow down, bind or even stop when you are in the middle of an important cut. Therefore, it is always better to have more power than to have less of it.

The Trunnion

This is the mechanism that takes the blade up or down depending on the machine. You use a crank to control this mechanism. You also have a mechanism for tilting the blade on each side.

This mechanism determines how accurate the cut will be, so you need to make sure the mechanism is easy to use and well built. You don’t need to have super strength to tilt the blade at all. As the time goes by, you might find yourself struggling harder to tilt the blade, which could be as a result of lack of lubrication or sawdust contamination of the gears.

Table Size

You need to choose the saw depending on the size of the table. The flatness of the table determines how accurate the cuts are, which requires you to check the flatness of the table with a gauge from time to time.

The larger the table, the better the performance of the saw blade. You also get to handle larger objects because you can support the piece and have the space to handle the task.

The Conclusion

The saw blade is one of the top tools you need in your woodwork shop. Take time to understand the various aspects to look out for when choosing the right saw blade so that you enjoy the best out of this tool.


Tips and Tricks for Laser Engraving Wood

Make no mistake about it; laser engraving wood isn’t the simplest of tasks. Even then, these tips will help you get a clean, dark engraving that is pleasing to the eye.

Be Mindful of the Machine That you Select

All laser engraving machines aren’t the same. You should, therefore, make a careful selection of your machine. At the very least, you need to be sure that the model you intend to buy offers the features required to handle wood engraving and everything else that comes with it. Choosing a good unit doesn’t have to be hard work though. Visit selectedbest.info to view a variety of the best laser engraving machines and decide which one works best for your needs.

Invest in a Low-tack Masking Tape

It is hard to get a clean look if you don’t find ways to reduce burn stains. You see, as your engraving machine works on the wood, it will burn and vaporize it. By heating the wood, the machine creates smoke that may stick to the surface, forming a yellow or brown layer. So, buy a low tack masking tape to wrap your wood before you can start to engrave. That way, you can protect the wood from marks or burns that may ruin the overall appearance.

Use 1200D DPI for Dark Engraving

Resolution is essential when it comes to wood engraving so you should make sure that you get it right, especially if you’re engraving on dark wood. Experts recommend that you use a resolution of at least 1200 dots per inch to achieve a sharp look. Remember, for really dark wood, your image must have a darker contrast than that of your wood. Sure, increasing the DPI will extend the time it takes to complete the job, but it is worth it, especially if you want to impress your client with the level of quality.

Use Actual Wood Instead of Plywood for Large Engraving

Plywood isn’t the best for large engraving. You see, different core types of plywood use different glues and veneer grades for the face. Certain adhesives may affect how your engraver works, making it even more difficult to control the design. Solid hardwood, on the other hand, looks better primarily because the grain runs in a consistent direction. Besides, you have total control over the surface of your wood. In conclusion, there are no pesky glues to interfere with your laser engraving machine.